Hard Facing

Product Description Mechanical Properties
Typical Hardness
Shielding Gas
Technical Data
Impact/Compression


PL 0675

Compression and Impact
Extremely hard titanium carbides in a martensitic matrix make this wire exceptional for high deposition welding of heavy components with low cracking. Outstanding combined wear resistance, including compression, impact, and abrasion. Excellent resistance to spalling and designed for onsite maintenance.
1/2/3 pass: 45/50/55 HRC
Carbides Knoop 2,500


PL 0674

High Pressure Impact / Abrasion - Slag Free
Dense, very fine network of Niobium carbides supported by a dual structure CrMo matrix for outstanding high pressure abrasion and point impact loading. Excellent on low alloy and Mn steels.
2 passes: 56-58 HRC
Gas 92% Argon, 8% CO2
Flow rate: 35-40 scfh

Product Description Mechanical Properties
Typical Hardness
Shielding Gas
Technical Data
Abrasion


PL 0641

Abrasion Resistance - Open Arc
Excellent abrasion and impact resistance on carbon and low alloy steels, Mn steels, and cast iron. Deposits take on high polish with outstanding fi ne particle abrasion resistance. No shielding gas required.
As Welded: HRC 57-61

MSDS


PL 0676

High Deposition Cr-Nb Carbide / Boride
Special Complex Carbides (Cr and Nb) and Borides for extreme abrasion resistance on high and low alloy steels, carbon steels, and 14% manganese steels. Relatively wide, thick overlays in even a single pass. Excellent high temperature performance up to 825°F (450°C).
As Welded: HRC 60-65


PL 0672

Extreme Abrasion Resistance
Nickel based alloy with high density of cast tungsten carbide particles evenly distributed for extreme abrasion resistance, even in corrosive environments. Slag free deposits with no cracking.
As Welded: HRC 55
Gas 98% Argon, 2% CO2
Flow rate: 25-35 scfh

Product Description Mechanical Properties
Typical Hardness
Shielding Gas
Technical Data
High Impact


PL 0648

Extreme Impact Resistance on Mn Steels
High Chrome and Manganese alloy for joining and build up of 11-14% Mn steels and carbon steel.
Designed to resist extreme impact, and machinable prior to work hardening. Excellent base for
harder overlay materials as well.
As Welded: 16-19 HRC
Work Hardened: 45-50 HRC

 

Product Description Mechanical Properties
Typical Hardness
Shielding Gas
Technical Data
Tool Steels


PL 0673

Crack Free, Multi-Pass Build Up
Exceptional toughness, ductility, and strength, allowing for multiple pass, crack-free deposits. Good heat resistance for tooling applications up to 900°F (482°C).
1/2/3 pass: 20/38/45 HRC
Gas 98% Argon, 2% CO2
Flow rate: 25-35 scfh


PL 0670

High Alloy, High Temperature Tool Steel
Highly alloyed wire for crack-free, anti-wear protective coating of parts subjected to metal to metal friction, cavitation, corrosion, and high temp oxidation up to 1200°F (650°C).
As Welded: HRC 48
100% Argon


PL 0671

High Speed Tool Steel
Gas-shielded, metal-cored alloy wire ideal for high speed tool steels. Low heat input for low dilution. Smooth, slag-free deposits are heat treatable. Excellent resistance to abrasion and impact up to 1112°F (600°C).
As Welded: HRC 62-64
97.5% Argon, 2.5% CO2
Flow rate: 30-45 scfh


PL 0647

Air Hardening Tool Steel
Ideal for repair and buildup applications involving air hardenable tool steels. Deposits are highly crack resistant, forgeable, and temperable.
As Welded: 1 / 2 pass:
55/58 HRC

N94 W14355 Garwin Mace Dr.  :  Menomonee Falls, WI 53051 USA  :   001 (262) 532-4677  :   (800) 558-8524 (USA/Canada)